ADVERTISING PROCEDURE OF GLASORA a.s.
1. PURPOSE AND SCOPE
1.1. These Complaint Procedures govern exclusively the complaint process, time limits, requirements for filing a complaint, the method of assessing defects, and the methods of resolving complaints. Warranty, general commercial, payment, delivery, and liability provisions are governed by the General Terms and Conditions of GLASORA a.s.
1.2. These Complaint Procedures are binding for all complaints regarding goods and services provided by GLASORA a.s. filed after the date they take effect.
2. LEGAL BASIS AND BINDING DOCUMENTS
2.1. The complaint procedure is governed by the General Terms and Conditions of GLASORA a.s., these Complaint Rules, and applicable laws.
2.2. In assessing defects, the following are particularly binding:
- VODP GLASORA, Inc.,
- these Complaint Procedures,
- Criteria for the visual quality of insulating glass (current version),
- Specific Properties of Glass Products (Current Version),
- Conditions for the transport, storage, handling, and use of insulating glass (current version),
- relevant EN standards, in particular EN 1279.
2.3. In the event of a conflict between documents, the document hierarchy established by VODP GLASORA a.s. shall apply.
3. GENERAL WARRANTY TERMS AND CONDITIONS
3.1 Scope of the Warranty
The Seller provides a warranty for all products for a period of 24 months from the date of delivery, unless otherwise agreed in the contract. Unless expressly agreed otherwise in writing, warranty terms and conditions other than those set forth in these General Terms and Conditions shall not apply.
- Product specifications
The optical, dimensional, and other physical properties and colors of the products are subject to manufacturing specifications and standards. Product colors may vary to a reasonable extent between individual product lines. The buyer must inspect the product’s color prior to installation.
3.3 Responsibility for Installation and Handling
The Seller shall be absolved of any liability in the event of installation, handling, cutting or alteration of the Products by the Buyer or a third party, except for hidden defects which could not have been detected with the exercise of professional care prior to the aforementioned activities with the Product.
- Technical documentation and consultancy
The Buyer is obliged to request the latest technical documentation for the delivered product, as well as the Seller's opinion in case of handling the product in a way that does not correspond to the Seller's recommendations. As the period of use of the product depends to a large extent on the conditions of use and on the maintenance of the supporting structure, the Seller does not guarantee the duration of use indicated in the technical documentation, unless otherwise specified in writing by the Seller.
- Limitation of liability
Any damages or other losses that the buyer may incur in connection with the performance of the contract as a result of one or more breaches of the seller’s contractual or legal obligations shall not exceed 100% of the agreed purchase price under the relevant contract, excluding VAT.
4. RETURN POLICY
- Legal basis
Complaints are handled in accordance with the Commercial Code or other previously agreed-upon rules.
- Norms and standards
In assessing defects, the Seller shall take into account:
- the STN EN 1279 standard, as well as individual product standards for insulating glass and other materials, and the tolerances permitted by these standards.
- the seller's internal policies “Visual quality criteria for insulating glass units“ and Specific characteristics of glass products
- Excluded claims
Claims do not apply to the characteristic physical properties of glass listed in the document“Specific Properties of Glass Products,” which are not subject to claims:
- occurrence of interference
- insulating glass effect and pressure fractures
- anisotropy in toughened glasses
- condensation on external and internal surfaces (dew formation)
- wettability of insulating glass
- spontaneous fracture of heat-strengthened safety glass (caused by the presence of critical nickel sulphide)
- thermal shock and thermal fractures
5. FILING A CLAIM
-
- Method of application
Any claim for a product, goods or service must be made by the buyer:
- in person at the company's headquarters, along with the product subject to the complaint, or
- in writing to the seller's address (by mail, fax, or electronically)
- stating the reason for the complaint immediately upon discovering the defect, without undue delay.
- Time limits for making a claim
In the case of obvious defects, in any case before further processing, installation or acceptance of the work (service), but at the latest:
- Quantity - at the time of acceptance of the contract by stating the fact in the acceptance report;
- Broken glass (glass shattering), scratches, and other mechanical damage – upon acceptance of the order, by noting the issue in the acceptance report;
- Visible defects —such as dimensional errors, scratches demonstrably caused during manufacturing (e.g., on the inside of insulating glass), faulty workmanship, assembly, etc.—must be reported prior to further processing or installation, but no later than the end of the warranty period;
- Visible shape defects - if a template has been used for the production - at the latest on acceptance of the order by indicating the fact on the delivery note;
- Hidden defects not caused by glass breakage —absence of a molecular sieve (desiccant), defective edge seal— until the end of the warranty period;
- Issued invoices, documents - before the due date.
- Consequences of not inspecting the goods
If the buyer fails to inspect or arrange for inspection of the goods at the time of taking over the goods from the seller, the seller cannot be held liable for obvious and recognizable damages.
- Exclusion of liability
The Seller is not liable for defects resulting from:
- changes in the natural physical, chemical and other objective natural properties of the product;
- changes to the components when they move relative to each other as a result of the technical design;
- improper storage, handling, or installation of the products after delivery (see Conditions for the Transport, Storage, Handling, and Use of Insulating Glass);
- damage caused by external events after receipt of the goods;
- changes in the specific properties of glass products (thermal shock, climatic conditions, pressure fracture, the effect of nickel sulfide on tempered glass, etc.).
- Inspection at the installation site
If, for valid reasons, it is not possible to return the product, the buyer shall request that the seller assess the claim at the product’s installation site. If the on-site inspection and the written inspection report conclude that the claimed defect is outside the tolerance limits (see EN 1279), the claim will be accepted and resolved in accordance with Article 5 of these Claims Procedures. If the claimed defect is within the tolerance limits, the complaint will not be accepted. If the complaint is found to be unfounded, the resulting costs associated with the inspection will be invoiced to the party requesting the inspection in full, and that party undertakes to pay these costs by submitting the request for inspection.
6. FILING A CLAIM
-
- Essentials of a complaint
In order to deal with the claim quickly, the following must be provided to support the claim:
- Buyer Identification
- Order/Contract/Job/Invoice Number
- Description of the reported defect – precise identification of the type of defect as per the complaint form
- Scope of the claim – product type, dimensions, number of items
- Delivery details – purchase agreement number, invoice number, delivery note number
- Proposed solution – such as a discount, replacement shipment, credit memo, etc.
- Address for complaint assessment
- Photo documentation
REQUIRED PHOTODOCUMENTATION must include:
For all defects:
- An overall view of the glass in question on a display stand, with the label visible (if present on the glass);
- A detailed description of the defect, including its exact location;
- Measuring the defect using a measuring template or gauge (see PI311 – Guide to Claiming for Glass Defects);
- Determination of the zone in accordance with EN 1279-1 (zone R, E, or M; see PI311 – Guide to Claiming Glass Defects).
For broken glass:
- General view of the crack;
- Close-up of the fracture origin in the as-cast condition (view of the edge where the crack originates);
- Photo of the whole stand with the glass (if the glass is still on the transport stand).
For visual impairments:
- A photo showing a measuring template or ruler (see PI311 – Guide to Claiming Glass Defects);
- Dimensions of the defect in millimeters;
- Number of defects per pane;
- Placement in glass zones (see PI311 – Guide to Reporting Glass Defects).
- Evidence in breaking glass at takeover
- a) For domestic deliveries: a record of the defect in the document“Glass Inspection at the Customer’s Premises,”confirmed by the customer and the driver. Without this record, this type of claim cannot be accepted.
- b) For export shipments: a note in the CMR or its annex, or a photograph and a record of the defect discovered upon delivery in the document“Glass Inspection at the Customer’s Premises,”confirmed by the customer and the driver. Without this evidence, this type of claim cannot be accepted.
- Complaint form
To ensure that your claim is processed efficiently, you must use the claim form, which contains all the information necessary to resolve the claim. The claim form can be found in Appendix 1 of these Claim Procedures.
7. Handling of Complaints and Resolution Procedures
-
- Manufacture of spare goods
Since customers need new, high-quality glass as quickly as possible, all products subject to a warranty claim are automatically sent to production as a standard procedure. In the case of complaints regarding defects in insulating glass that was manufactured in cooperation with other parties or from special glass supplied by other entities (e.g., tempered glass, enameled glass, etc.), the insulating glass will be manufactured as soon as possible after the special glass is delivered to the seller.
- Time limit for decision
The seller shall keep the buyer informed of the progress of the complaint procedure. If the buyer has complied with all the requirements of the GLASORA a.s. Complaint Policy, the seller must decide on the validity of the complaint within 30 days of receiving it. If the complaint is rejected, the complainant must be informed of this without undue delay, stating the reasons for the rejection.
- Methods of settling a claim
- Replacement of the returned merchandise (free replacement);
- A refund of the value of the goods or services (credit note), provided that the buyer expressly requests this method of settlement;
- Product repair (in certain special cases);
- Granting a discount;
- Rejection of the claim.
- Rejected claim
If the claim is rejected, an invoice for the newly manufactured product will be applied by the Seller.
8. HANDLING OF THE SUBJECT OF THE CLAIM BY THE BUYER
-
- Obligation to hand over the claimed glass
In the event of a complaint, the buyer must hand over the properly labeled glass subject to the complaint to the carrier at the place of delivery or deliver it directly to the seller at the manufacturer’s facility no later than 30 days after filing the complaint, unless otherwise agreed.
- Conditions of acceptance
Unless the glass subject to the claim is properly labeled, the claim form (Appendix 1) is completed, and the insulating glass subject to the claim is returned to the seller, the claim will be rejected.
9. LABELING OF SKIS BEING RETURNED BY THE BUYER
-
- Mandatory marking of the claimed glass
The buyer must properly label the glass being returned:
- Attach the complaint form, including the original order number, to the subject double-pane window
- Mark the defect (preferably with a marker) on the insulating glass being returned
- Mark with the word “COMPLAINT” on the glass or packaging
- Marking on removal
When taking the claimed glass away from the customer, the glass packed on the stand must be marked:
- Production complaint order number (111…..)
- By marking the claimed defect
- Procedure: Print the claim form → place it in a plastic sleeve → attach it to the glass being claimed
For more details, see document PI311 – Guide to Filing Claims for Glass Defects.
If the glass delivered to GLASORA a.s. is not labeled as described above, it will be considered glass intended for disposal in accordance with applicable waste management regulations.
- Purpose of the marking
The marking is necessary to assess the reason for the complaint when it is not possible to properly measure and document the defect with photo documentation.
10. HANDLING OF THE ITEM SUBJECT TO THE CLAIM BY THE SELLER
Once the claims process is complete, all glass subject to claims will be disposed of.
11.ASSESSMENT OF THE CLAIM AND DECISION
11.1. Inspection and Technical Assessment: If it is determined that the reported defect exceeds the permissible tolerances specified in the binding documents, the claim may be accepted. If the reported defect falls within the permissible tolerances, the claim will be rejected. In the event of an unfounded complaint, the seller may charge for the costs of inspection, transportation, handling, testing, and expert assessments.
11.2. Timeframe for a decision: If the complaint meets the requirements set forth in Article 6, the seller shall decide on its validity within 30 days of receiving the complete complaint. If the complaint is rejected, the seller shall state the reasons.
11.3. Methods of Resolution: The seller shall determine the method of resolving a valid complaint in accordance with the nature of the defect, in particular:
- by replacing the defective goods (free replacement),
- repairing the goods (if technically feasible),
- by offering a discount,
- financial compensation (credit memo).
11.4. Production of Replacement Goods: If a claim is accepted, the production of replacement goods is initiated without undue delay; for glassware or products made from special components, the delivery date depends on their availability.
11.5. Unjustified Complaint: If a complaint is rejected, the seller is entitled to charge:
- costs as specified in Section 11.1,
- or newly manufactured goods (if requested by the buyer),
- other documented and reasonable costs associated with the assessment process.
12. FINAL PROVISIONS
-
- Consistency with other documents
This Complaints Procedure is an integral part of:
- General Terms and Conditions of Sale and Delivery (GTC) of GLASORA a.s.
- Document:“Specific Properties of Glass Products”
- Conditions for the transport, storage, handling and use of insulating glass units
- Guidelines for Filing Claims for Glass Damage (PI311)
- Validity and effectiveness
This Complaint Procedure shall enter into force on the date of its publication and shall apply to all complaints filed after that date.
- Changes
Changes to this Complaints Procedure are reserved exclusively by GLASORA a.s. The current version is always available on the company's website.
In Nitra, on June 1, 2026
Radoslav Černý
Chairman of the Board of Directors
GLASORA, Inc.
INSULATING GLASS COMPLAINT FORM
CUSTOMER NAME:
OUR MANUFACTURING ORDER ID NUMBER / + ITEM:
(order number / item number; this information can be found on the label, on the confirmation you received, or on the packing slip)
CAUSE OF COMPLAINT: please mark "X"!
☐ Broken glass (on a stand, in a yard, on a building)
☐ Cracked glass (in built-in condition - indicate installation location)
☐ Damaged/soiled spacer
☐ Molecular sieve in insulating glass
☐ Condensation on the insulating glass in the IS cavities
☐ Overstretched/torn/missing butyl in IS
☐ Mussel
☐ Orientation of ornament (width x height)
☐ Streaks in the IS
☐ Dirt/defect/defect of insulating glass
☐ Scratch in the IS
☐ Transplanted spacer
☐ Dirty grid
☐ Poorly made grille
☐ Wrong size/thickness of insulating glass
☐ Incorrectly drawn non-standard drawing (dimensions, orientation, etc.)
☐ Missing sealant
☐ Other (please describe the defect not listed in the table in the line below)
SIZE AND NUMBER OF DEFECTS:
|
|